Page 48 - IRSEM_Main Book

(b) A copy of those portions of each of the books mentioned in Para 3.5.2(a)
as also all circulars and instructions concerning his work, shall be
maintained by him for his reference and information. He shall keep them
up to date in respect of Correction Slips issued from time to times.

(c) A Technician (Signal) shall not permit any Helper or artisan staff to do any
adjustment to the gear in use except under his personal supervision and
he shall ensure that the staff under him clearly understand this rule.

(d) Maintenance of Muster Sheets etc.: A Technician (Signal), when posted
at station where his seniors are not posted/not available, then, he shall
mark his own attendance and that of his staff on the muster sheets
received from the SSE/JE (Signal) before starting his work. Erasing and
over-writing is not permitted. Loss of muster sheet shall be brought to the
notice of the SSE/JE (Signal) at the earliest.

(e) A Technician (Signal) shall work to the duty rosters provided and see that
the staff under him also works according to the roster.

(f) Materials and Tools and Plant: A Technician (Signal) shall, where necessary,
get his requirements of materials for maintenance and repair work from the
SSE/JE (Signal), giving full particulars of station, location and the gears to be
replaced. Released materials shall be returned to the SSE/JE(Signal)
immediately. There shall absolutely be no wastage of any material.
A Technician (Signal) shall always take his tools with him when on duty. All
tools shall be kept in a condition fit for immediate use.

(g) Co-operation between Technicians: Technician (Signal) shall co-operate
in testing of all the signals. Technician (Signal) shall extend full co-
operation to each other in their day-to-day work.

Section 9: Duties of Helpers/Assistants

3.9.1 Duty list of Helpers/Assistants:-

(a) The general duties of Helpers/Assistants are as follows :

(i) Cleaning of Glued Joints/Block joints.

(ii) Cleaning of all S&T gears and their up keeping.

(iii) Painting of all S&T gears and their up keeping.

(iv) Cleaning of garbage/vegetation under Point rodding and surrounding
of all signaling gears/locations.

(v) Cleaning of chair plates and maintaining their lubrication.

(vi) Reporting of any infringement of signal/Ladder etc.

(vii) Upkeep of Relay room, Power room, Battery room, Maintenance
room, Store room etc.
(viii) Maintaining minimum essential tools with him for day to day works as
per instructions of Technician/SSE/JE(Signal).

Chapter 3: Duties Of Signal Supervisors And Technical Staff Page 27 of 535